斯图特 S131R
展商:United Grinding Group Management AG
原产国/地区:瑞士
S131是一款内圆圆弧磨削机,尤其适合加工高硬度材料制成的复杂工件。 该机型回转直径为300 mm, 最大工件重量为100 kg。该机型是凹模制造的理想之选,特别是对以硬质合金和陶瓷材料为主的包装行业,以及液压行业的液压零件的内孔,球面及锥面的磨削。其具备多项技术特性, 如革命性的StuderGuide®导轨系统, 直线电机高精度轴驱动, 全自动直接驱动B轴等。 The S131 is a radius internal cylindrical grinding machine that is especially suitable for grinding complex workpieces from very hard materials The maximum swing diameter is 300mm (11.7") and the maximum workpiece weight is 100kg (220lbs).The machine is ideal for the manufacture of drawing dies, especially in the packaging industry, where tungsten carbide and ceramics are primarily processed, and the grinding of internal holes, spherical surfaces, and conical surfaces of hydraulic components in the hydraulic industry.The machine has a host of sophisticated technical features such as the revolutionary StuderGuide® guideway system, high-precision axis drives with linear motors, a fully automatic B-axis with direct drive, etc.
展品详情
硬件部分:
· StuderGuide® 直线驱动导轨系统
· 全自动直接驱动B轴, 回转范围为-60°至 +91°
· 主轴转塔可加装多达4支磨削主轴
· 工件头架主轴配备C轴,可用于成型和螺纹磨削
· 全封闭外罩带两道滑动门
· Granitan®S103人造花岗石材质床身
软件部分:
· HMI StuderSIM使操作和编程变得简单
· 利用StuderSIM编程和模拟软件,可在机床控制台或外部计算机上创建和模拟磨削及修整程序
· 加料装置和外设均采用标准化接口
Hardware:
· StuderGuide® guideway system with linear drive
· Fully automatic B-axis with direct drive with a swiveling range from -60° to +91°
· Spindle turret with up to four grinding spindles
· C-axis for the workhead for form and thread grinding
· Full enclosure with two sliding doors
· Granitan® S103 mineral casting machine base
Software:
· Simple to use and program thanks to HMI StuderSim
· StuderSIM programming and simulation software for the creation and simulation of grinding and dressing programs on the machine control or on an external PC
· Standardized interfaces for loader and peripheral devices