斯图特 S121R
展商：United Grinding Group Management AG
原产国/地区：瑞士
S121是一款内圆圆弧磨削机。可作为卡盘零件内圆磨削、表面磨削和外圆磨削的理想设备。该机型回转直径为300 mm, 最大工件重量为100 kg。内圆圆弧磨削机尤其适合加工由硬质材料（如硬质合金、陶瓷和蓝宝石）制成的复杂工件，以及一般的磨削任务。其具备多项技术特性, 如革命性的StuderGuide®导轨系统, 直线电机高精度轴驱动, 全自动直接驱动B轴等。 The S121 is a radius internal cylindrical grinding machine. It is the ideal machine for internal, face and external grinding of chuck components. The maximum swing diameter is 300mm (11.8") and the maximum workpiece weight is 100kg (220lbs).The radius internal cylindrical grinding machine is especially suitable for grinding complex workpieces from very hard materials such as tungsten carbide, ceramics and sapphire as well as for general grinding tasks. It has a host of sophisticated technical features such as the revolutionary StuderGuide® guideway system, high-precision axis drives with linear motors, a fully automatic B-axis with direct drive, etc.
展品详情
硬件部分：
· Granitan®S103人造花岗石材质床身
· StuderGuide® 直线驱动导轨系统
· 全自动直接驱动B轴, 回转范围为-20°至 + 91°
· 主轴转塔配备两个磨削主轴，或一个固定主轴，或两个平行主轴
· 工件头架主轴配备C轴，可用于成型和螺纹磨削
· 全封闭外罩带两道滑动门
软件部分：
· HMI StuderSIM使操作和编程变得简单
· 利用StuderSIM编程和模拟软件，可在机床控制台或外部计算机上创建和模拟磨削及修整程序
· 加料装置和外设均采用标准化接口
Hardware:
· Granitan® S103 mineral casting machine base
· StuderGuide® guideway system with linear drive
· Fully automatic B-axis with direct drive with a swiveling range from -20° to +91°
· Spindle turret with two grinding spindles or one fixed spindle or two spindles in parallel
· C-axis for the workhead for form and thread grinding
· Full enclosure with two sliding doors
Software:
· Simple to use and program thanks to HMI StuderSiM
· StuderSIM programming and simulation software for the creation and simulation of grinding and dressing programs on the machine control or on an external PC
· Standardized interfaces for loader and peripheral devices